> An oil filter wrench worked beautifully for me.
>
Jim
=====================
> Subject: Re: [TR] Wrench: TR3A OD Drain Plug
>
> Are you talking about the small, square headed pipe plug, or the large,
> flat brass plug which holds the filter in place on an A type?
>
> I've always used a hammer and a suitable drift to remove and
> install the large brass plugs, carefully applying the force to
> the notches in the cap.
>
> mjb.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|