Another alternative if you want the horn and turn signals to work is to switch
to a TR4 steering column.
Best regards,
Tom
> Date: Mon, 12 Oct 2009 07:43:22 -0700
> From: ahwahnee18@gmail.com
> To: triumphs@autox.team.net
> Subject: Re: [TR] Rack & pinion conversions for TR3's??? CONTROL HEAD
Solution (one of many)
>
> On 10/11/09, A Daniel Cronin <adcronin@ameritech.net> wrote:
> > In regards to the turn signal function when converting to R and P
steering,
> > The folks at Bastuck also sell as a separate item the "slip ring" that is
a
> > part of their kit (BP Northwest)...
>
> Also, Bob S's "More BS" shows a DIY slip ring for just the horn that
> may be an alternative for the crafty & thrifty:
>
> http://members.cybertrails.com/~ahwahnee/R%26P-slip-ring.JPG
>
> Geo
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> http://www.team.net/archive
_________________________________________________________________
Hotmail: Trusted email with Microsofts powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141664/direct/01/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|