triumphs
[Top] [All Lists]

[TR] Sticking Valves?

To: triumph list <triumphs@autox.team.net>
Subject: [TR] Sticking Valves?
From: Michael Lang <mlang99@comcast.net>
Date: Sat, 19 Sep 2009 09:32:22 -0700
I have now got about 2000 miles on my freshly rebuilt TR3 engine and am
having a sporadic problem. I drive a lot of hilly back roads on the way
to and from work. When I climb one particularly long hill at about
65mph, the engine starts missing on one cylinder and I begin to hear a
lot of valve train clatter. If I back off a bit, it stops missing and
runs fine. It continues for such a short time after reducing load that I
have never been able to stop and diagnose the problem.

When I rebuilt the engine, I had the head done with new valves, bronze
guides and hardened seats. I think that I have a valve that is sticking
when running hot under load. Is this a common problem with these
engines? Any other thoughts an what might be happening?

Thanks,

Mike
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>