I have never had one fail. They are solid state devices and much less prone
to failure than points and condenser.
JOe
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Ed Woods
Sent: Saturday, September 19, 2009 5:46 AM
To: triumphs@autox.team.net
Subject: Re: [TR] TR4A Sputtering - Partially Solved
And 50 bucks when the Pertronix module fails!
Ed Woods
----- Original Message -----
From: "Joe Curry" <spitlist@cox.net>
To: "'Brian Thomas'" <thomasb@queensu.ca>; <triumphs@autox.team.net>
Sent: Friday, September 18, 2009 10:10 PM
Subject: Re: [TR] TR4A Sputtering - Partially Solved
> Brian,
>
> While you are at it, why not install a new Pertronix. It will be far more
> reliable and should it ever fail, you can just quickly slip in a set of
> points and condenser to get you on your way.
>
> Joe
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|