Perry,
Don't know if this will help but I refitted the rear cylinders on my 4A a
few weeks ago. My car has a Girling system with 9" drums. My retaining kit
came from BPNW. The process was a little confusing at first so I documented
it with some pics here:
http://computeresources.com/TR4-A/RearBrakes/rear_brakes.htm .
HTH,
Glenn
.
>
> I cannot get the locking plates on the new cylinder. Following the advice
> on
> correct way and order for sure - looking at Randalls and David's great
> adcvice
> and direction- in fact there is no way to get just the two larger platess
> on
> without the distance piece. It would take a LOT of pressure and hammering
> to
> get the pieces on, and I doubt that they could ever be removed if forced
> on.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|