> There is a check to see if the circuit is working properly. When you
> turn the ignition switch on, both the brake light and the oil pressure
> light should come on.
Unfortunately, that only checks part of the circuit. It won't tell you if
the wire to the PDWA switch is disconnected or broken; or if the PDWA switch
doesn't work, or the piston is stuck.
My light works fine, but the wire to the PDWA is MIA. Not sure if it broke
or was terminated with prejudice by a previous owner, but it's gone.
-- Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|