triumphs
[Top] [All Lists]

Re: [TR] TR3A valve adjustment

To: DLylis@aol.com
Subject: Re: [TR] TR3A valve adjustment
From: Geo Hahn <ahwahnee18@gmail.com>
Date: Sun, 26 Apr 2009 18:48:09 -0700
My cam is stock so I use .010 & .012 (allowing a bit of leeway on the
exhaust) and mine makes a bit of noise.

IOW, maybe they won't be quiet once the oil is warmed up.  Also, having them
w/i .001 is pretty close I'd say.

On Sun, Apr 26, 2009 at 4:35 PM, <DLylis@aol.com> wrote:

> I have a BPNW 270  cam
> in this motor and it calls for .12 int and .14 exh.  I started it first
> time and drove maybe 20 miles and the valves became noisy so I waited
> overnight and checked and they were .001 + wide.
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>