> An acquaintance just asked if I knew of a way or device to enable a
> vertically challenged individual to reach the clutch pedal in his TR6.
A few ideas that might help:
1) Make sure it has the larger MC and smaller slave cylinder. I forget
offhand which is which, but one of them changed during TR6 production, and
I've heard that the other one is sometimes sold in the wrong size.
2) Install an adjustable pushrod for the MC (from a TR3A-4). This can be
set longer (to some extent) to move the pedal higher.
3) Install a braided SS clutch line. Supposedly the stock line bulges
enough under pressure to take up some of the pedal movement.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|