In a message dated 4/7/2009 7:49:49 AM Central Daylight Time, WCA09@aol.com
writes:
> In replacing my rear axle pinion oil seal, I note that the flange itself
> shows considerable wear. So much so that I doubt even a new seal will
> actually
> 'seal' as it should. I also note that Moss sells a Speedi-Sleeve to remedy
>
> this exact situation. It apparently is pressed over the worn area
> providing a
> 'new sealable surface' (their claim). Does anyone have experience with the
>
> Speedi-Sleeve? Does it really work?
>
Indeed it does. I had an annoying leak on my TR6 diff even after replacing
the seal. I put in a Speedi Sleeve and the leak virtually stopped. Even with
the old seal.
I highly recommend it.
Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|