Rodney,
I suppose that the little brass plugs are less likely to permanently corrode
in place in an aluminum head than steel bolts.B But the steel bolts get the
job done.
-Tony
----- Original Message -----
From: FordneyNJ@aol.com
To: spamiam@comcast.net
Sent: Monday, April 6, 2009 12:14:38 AM GMT -05:00 US/Canada Eastern
Subject: Re: Triumphs Digest, Vol 3, Issue 152
Tony,
Thanks for the information.B My cat is off.B I was just re-torquing the head
and figured why put the rail back on.B I had seen some nice little brass
plugs a while back on e-bay and hope to find a set.B If metric bolts
work.....
B By the way, I have a working air pump, all the fittings and a new spare
check valve.B They will be saved.
Rodney
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|