triumphs
[Top] [All Lists]

[TR] TR3A Cylinder

To: "Triumph Mail List" <triumphs@autox.team.net>
Subject: [TR] TR3A Cylinder
From: "Scott Suhring" <suhringtr36@comcast.net>
Date: Sat, 4 Apr 2009 07:43:15 -0400
When installing the rear wheel cylinder (Girling brake) for a '59 TR3A, do
you use the distance washer or not? I had a cylinder blow on me and had the
spacer installed (no connection to the blow). What got me thinking with the
replacement is that without the spacer, the cylinder slides fairly easily
and with the spacer, it is very tight. The manuals make no mention of the
spacer.  TIA

Scott Suhring
'70 TR6
'59 TR3
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>