> I could make plates as spacers between the spring and the axle for the
> pasenger side which will lower on that side.
Ignoring the sophistry about what constitutes "droop", I would follow in the
factory's footsteps and add shims as necessary to lower the passenger's
side.
In an ideal world, the new springs would match exactly. Here in the real
world, they often don't. Use the shims, Luke.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|