I received my block back from the machine shop. Seems in cleaning dip has
pretty much eaten up the aluminum plugs on the oil galley. Am I correct that
the threads are pipe thread and a iron or brass plug will work as well as
the aluminum?
Any thought as to why they used alumina plugs in a cast iron block ?
Thanks
Bob Nogueira
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|