The short answer is yes and no - mostly no. The 3 rail case itself is the
same (I am assuming that is what we are discussing here) The tail shaft
and a few internal components are the same, as well as the shift rail assy.
The shift lever is different, as well as the transmission input shaft
(different length, splines) and the gears are different (ratios, layshaft)
The bearings are all the same, as well as the syncros - the overdrive and
adaptor are also the same -
************************original message*************************
At 11:35 AM 10/15/2008 -0400, you wrote:
>Does anyone know if the Spitfire and GT6 transmissions are the same and
use the same overdrive?
>
Barry Schwartz
La Mesa, CA (San Diego)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|