Gary, I ran some kind of ship anti-rust treatment thru the rails that were
mounted of a homemade rotisserie. I also raised one end, I forgot which,
so it'd flow better. I think I put a stopper in some pre=exisiting holes.
I did not drill any new holes.
Paul
----- Original Message -----
From: "Gary Nafziger" <nafzigerg@yahoo.com>
To: <triumphs@autox.team.net>
Sent: Tuesday, September 09, 2008 3:52 PM
Subject: [TR] tr-3 frame inside frame rails treatment
> I'm doing a frame up on tr-3. Just wondering what others have done with
> the
> inside frame rails. I've done POR-15 on the outside but am wondering if
> its
> common to also do the inside...........drilling holes ect. also what kind
> of
> product to use.
>
> thanks
>
> gary nafziger
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as dorpaul@bellsouth.net
>
> http://www.team.net/archive
--
I am using the free version of SPAMfighter for private users.
It has removed 916 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/len
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|