In a message dated 9/9/2008 2:53:13 PM Central Daylight Time,
nafzigerg@yahoo.com writes:
> I'm doing a frame up on tr-3. Just wondering what others have done with
> the
> inside frame rails. I've done POR-15 on the outside but am wondering if its
> common to also do the inside...........drilling holes ect. also what kind
> of
> product to use.
>
>
I took mine to Ziebart. They treated the interior cavities with a rust
inhibitor and then coated them with their usual petroleum product. Quick,
convenient, and about as good as anything I could think of (short of zinc
dipping).
Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|