triumphs
[Top] [All Lists]

Re: [TR] grease fittings at cap ends?

To: ahwahnee18@gmail.com, triumphs@autox.team.net
Subject: Re: [TR] grease fittings at cap ends?
From: Andrew Mace <zoboherald@aol.com>
Date: Mon, 25 Aug 2008 16:36:30 -0400
-----Original Message-----
From: Geo Hahn <ahwahnee18@gmail.com>

I was thinking that the very early TRs had a zerk on the hub cap and
were to be filled with grease....

==AM==
You might be close to correct on that.  IIRC, the earliest TR2s shared 
front hubs with the Mayflower, and that hub had a small Zerk (but not 
on the bearing cap; just next to it, though) fitting just for such a 
purpose.

--Andy  Mace

*Mrs Irrelevant: Oh, is it a jet?
*Man: Well, no ... It's not so  much of a jet, it's more your, er, 
Triumph Herald engine with  wings.
 -- Cut-price Airlines Sketch, Monty Python's Flying Circus  (22)

Check out the North American Triumph Sports 6 (Vitesse 6) and Triumph 
Herald Database at its new URL: <http://triumph-herald.us>
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>