Geo Hahn wrote :
> http://www.cybertrails.com/~ahwahnee/Rebound.JPG
>
> That's a TR4 but I think it was unchanged from the '3.
>
> As I recall that rubber block is just 'glued' to the metal
> piece -- anyway I had one fall off once and I just glued it back on.
That's all correct. I just wanted to add that there is a fairly large metal
assembly that bolts to the frame (the thing with three bolts and two big
holes visible in Geo's photo) and is normally removed when removing the
spring. Then there is a smaller metal bracket that carries the rubber
block, held to the larger bracket by a single bolt.
The larger bracket can be seen as item 5 at
http://tinyurl.com/68qzg4
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|
