As randall suggested I found threaded rod to take out the forward leaf spring
bolt and promptly twisted it off right at the head of the bolt. I think it'll
be easy to pull out with an extracter. However in shopping the web site i
quickly became confused, not knowing the meaning of metal ratings. I know 5
is pretty hard and 8 is very hard but they don't seem to have those strength's
in the size I want. Is B7 hardness good enough?
thanks!
gary nafziger
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|