---- FRED E THOMAS <frede.thomas2@verizon.net> wrote:
> Using a ==bath towel== turn the air pressure up and blow it out into the
> towel, I try to never use any tools as the bore can be scratched and leave
> the M/C uselesss
But the part of the bore that is preventing the piston from coming out isn't
the part that is a sealing surface...I'd get some fine emery cloth and knock
the rust/corrosion down a bit, then pop it out with air or inertia. Should
help to keep the piston unscathed.
Jeff Scarbrough
Spitfires and a 6
Athens, Ga.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|