On Friday 25 January 2008 06:19 pm, CarlSereda@aol.com wrote:
> Unadulterated U.S.TR4/4A, owners:
> For some reason on my TR4 I have 7 drilled holes in the rear trunk lid in
> the license plate area. I installed this used trunk lid around 1980 after a
> hit 'n run left me with severe damage. Getting ready to weld at least 5 of
> these holes closed, and want to ensure I have the 2 remaining drilled holes
> in the right spot for my license and amco rack. Can you please tell me the
> height of your 2 bolts from bottom edge of trunk lid (center of bolt head
> to bottom edge of
> lid)?
> Regards,
> Carl
> '63 TR4 since '74
Carl,
Just to confirm, just measured my 63 TR4 and as Steven noted 8 1/4 inches from
the bottom edge. But it is in the mid 20s here.
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|