End Dust does a nice job on the gauge face. This leaves a nice deep face to
the black and repels dust. It does not dry out and retains this look for
years. Wipe it on with a clean cloth just before you reassemble the glass.
End Dust has no polish in its formula so you get no wax residue.
Scott Suhring
Mechanicsburg, PA
'70 TR6
'59 TR3
-----Original Message-----
From: triumphs-bounces+suhringtr36=comcast.net@autox.team.net
[mailto:triumphs-bounces+suhringtr36=comcast.net@autox.team.net] On Behalf
Of Lanoway, Brian
Sent: Thursday, January 24, 2008 10:34 AM
To: triumphs@autox.team.net
Subject: [TR] TR6 gauge cleaning - any advice?
I've got all the gauges out of my TR6 as I get ready to install my new
Prestige Autowood dash. The new dash is so damned nice that I'm now
highly motivated to make sure everything I put into it doesn't detract
from this work of art.
Any tips on cleaning the chrome rings, gauge faces, glass etc. on my TR6
gauges? Are there any products that are well suited to this? Is there
anything else I should consider before I install my new wood dash? I am
by the way putting in new crash pads around the dash cause my current
ones all of a sudden look shabby.
Thanks much in advance,
Brian Lanoway
1973 TR6
Winnipeg
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|