Will it be alright to blow (120psi) air from an air compressor into the master
cylinder/slave cylinder using either the brake fluid entrance or exit? I am
doing this in an effort to clean my master cylinders/slave cylinder prior to
filling them with brake fluid? Seemingly, since the brake cylinders' may see
more than 1000 psi, this should be ok.
Thanks, Paul Dorsey 60 TR3
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|