triumphs
[Top] [All Lists]

Re: [TR] Tin-Zinc plating kit

To: Dave Willner <dwillner@ptd.net>
Subject: Re: [TR] Tin-Zinc plating kit
From: John Mitchell <jmitch@snet.net>
Date: Fri, 21 Dec 2007 20:55:06 -0500
I've used the Caswell Copy Cad kit with great success.  It's expensive 
to get started, as it's best to have a variable power suppy to do the 
plating.  You can just plate and it will leave a dull silver zinc like 
cadmium plate, or you can add a brightener and get an almost chrome 
shine to the plate.  You can also dip in yellow chromate dye  after 
plating for yellow zinc parts.   If you've just got a bucket of bolts to 
be done, it would be cheaper and much easier to go commercial .  If you 
watch ebay, you can often pick up a power supply pretty cheap.  As with 
any plating, the preparation the part receives is the most important 
part. Check out caswell's web site.  There's a great deal of information 
there, and they are very helpful with problems.  They also host a 
plating forum online.       John Mitchell    76 TR6 with lots of fresh 
yellow zinc parts.  

Dave Willner wrote:
> I'm thinking about improving the appearance of a lot of smaller hardware and
> odds and ends this winter and was wondering if anyone has any experience using
> any of the plating kits available today, I know Eastwoods sells a fairly
> inexpensive Tin-Zinc kit that seems to produce some pretty nice results. I've
> also looked at some of the cad plating systems, a bit more expensive but a
> real nice finish. Thanks
>
> Dave Willner
> Stroudsburg, PA
> 59 TR3A Apple Green
> 70 MGB BRG
> 70 BSA 441 Victor Special
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>