In any case going a couple thou more than stock isn't a bad idea. Even if
the cam is stock this gives you a margin of protection as you definitely do
not wan the clearance to tight.
Geo
----- Original Message -----
From: "Randall" <tr3driver@ca.rr.com>
To: "'jim hearn'" <jimhearn1@comcast.net>; <triumphs@autox.team.net>
Sent: Friday, August 24, 2007 8:24 AM
Subject: Re: [TR] More on valve adjusting
>> Thanks guys! Also, if my TR6 has an unknown but definitely
>> hotter cam, are the valves still adjusted with the factory settings?
>
> Usually, though not always, 'hot' cams take more clearance than stock.
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|