Check the extension housing bushings. They wear out quickly and cause all
sorts of problems..
John
----- Original Message -----
From: <Dave1massey@cs.com>
To: <mark@bradakis.com>; <triumphs@autox.team.net>
Cc: <tr8@mercury.lcs.mit.edu>
Sent: Tuesday, July 31, 2007 8:04 AM
Subject: [Wedge] Re: [TR] Wedge 5 speed gearbox issues
> In a message dated 7/30/2007 10:32:34 PM Central Daylight Time,
> mark@bradakis.com writes:
>> So this fellow brings a car into the shop, it has a Rover SD1
>> V8 mated to a TR8 5 speed gearbox. The issue is that about
>> 3/4ths of the time the box shifts fine. But a bit too frequently
>> it is really difficult to downshift from 3rd to 2nd, or to get it
>> into first and finding reverse can be a bit troublesome. The
>> clutch system seems to be working just fine and is most
>> likely not part of the problem.
>>
> There was a similar complaint on the wedge list. The problem seemed to
> have
> resolved itself with no intervention from the owner but diagnoses ranged
> from
> poor lubrication in the exposed shifter mechanism to a foreign object
> caught
> in same.
>
> I forwarded the question to the wedge list for more input.
>
> Dave
>
> PS: My 5 speed has worked flawlessly over the last 7 years and 50, 000
> miles.
> Hence I'm not much help here.
> --
> Forwarded via the TR7/8 mailing list. Please send administrative requests
> to the majordomo at tr8-request@mercury.lcs.mit.edu
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|