Allen,
Thanks a ton. Your photos clearly show that my park-lamp brackets are indeed
1/2" too low for a TR4 grill. Perhaps my two valances, the one I installed in
'78 and the one I'm installing now, are in fact from TR4As. I will
drill/reweld my brackets 1/2 inch UP based on your excellent documentary photos
and my
park-lamps will then tie in perfectly.
Thanks again - I was stumped!
Carl
'63 TR4 since '74
<< Carl, Here are some photos, I hope they clear things up. You might want to
hang the fenders just to be sure that the grill is being correctly position
ed. It looks like your piece is not in the car yet? So, I would try and put m
ore together first temporarily and check fit. However, if the bracket seems w
rong I wouldn't hesitate to reposition it. Allen >>
**************************************
Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|