In a message dated 7/31/2007 2:06:27 PM Central Daylight Time,
TR250Driver@aol.com writes:
> I did renew the bump stops. I put standard rated springs in from one of
> the
> big three. I was looking for the correct ride height. I do not wish to
> install any uprated springs that in theory lower the car but I may have to
> go that
> route since my confidence is low now on the standard springs available.
>
The problem is there are three springs used across the line depending on TR7
vs TR8 and AC vs non-AC. VB sells one spring. And it is the wrong one.
Putting in Ted's "lowered" spring raised my car at least an inch. And it dives
less during braking.
Dave
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|