Hey Guys,
Since you are discussing Wedges. Does anyone have a recommendation of a
supplier for front springs? Me 80 TR8 sits too low upfront and bottoms out
when I
go over a good size bump at speed. This is in spite of the fact that I
replaced everything up there a few years ago with new springs and Konis. It
was
sitting too low from that point on. I am thinking about going back in there
but
I want the right stuff.
Thanks in advance,
Darrell
BTW Jack, throw in a couple of Spits, GT6, 4 speed TR7 gearboxes along with
your TR6 & TR8 shift patterns and then you have arrived into CRS land. The
only tway I survive is those handy original knobs with the shift pattern on
them.
**************************************
Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|