Ed, I got the screws. Thanks so much!
Scott
-----Original Message-----
From: triumphs-bounces+suhringtr36=comcast.net@autox.team.net
[mailto:triumphs-bounces+suhringtr36=comcast.net@autox.team.net] On Behalf
Of Ed Woods
Sent: Tuesday, July 17, 2007 7:45 AM
To: amcewen2@cogeco.ca; Triumph Sports car discussion
Subject: Re: [TR] TR3 Headlamp Caged nuts
List,
I bought a box off 100 a quarter of a century ago from "The House of a
Million Screws", The Service Supply Company in Indianapolis, IN. They are
caged like the originals ans snap right in the original square hole. Thread
is 8-32. I used brass screws to avoid the tin worm.
If the person that was in need and started this thread will contact me off
list, I will send him a set.
Ed Woods
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|