> Can anyone help with advice born of skinned knuckles and hard
> experience pass on some wisdom to help me get this head off?
> I've tried some wood-softened blows with a hammer, laterally.
There's a nice write-up at
http://www.team.net/www/triumph/mainStag.html
Scroll down to "Cylinder Head Removal". Although written for a Stag, the
basic idea should work fine on a TRactor motor. Obviously ignore the
overhead cam stuff ... no need to remove the front pulley or timing cover on
a TR motor.
Randall
CONFIDENTIALITY. This electronic mail and any files transmitted with it may
contain information proprietary to NavCom Technology, Inc., or one of its
affiliates, and are intended solely for the use of the individual or entity to
whom they are addressed, shall be maintained in confidence and not disclosed to
third parties without the written consent of the sender. If you are not the
intended recipient or the person responsible for delivering the electronic mail
to the intended recipient, be advised that you have received this electronic
mail in error and that any use, dissemination, forwarding, printing, or copying
of this electronic mail is strictly prohibited. If you have received this
electronic mail in error, please immediately notify the sender by return mail.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|