List,
Here I am again asking for help, (as always).
First, I id get the reply about the 1/4' spacers if I wantef to use the
TR6 wheels.
The question is when I change all the studs to the standard size,
(longer ones than normally used on the wire wheels), I will have to use
the spacers on BOTH the wires and the steel wheels? I assume under the
splinded stub for the wires, and between the spindle and drums for the
steel wheels.
Second, I am in need of a LHD left side (drivers side) windscreen
stantion. Does anyone have one they might be willing to sell, or know
where I might get one?
Mine is slightly bent at the lower part and I can't get the bottom screw
into the window frame, and it leaves a space that is very noticable. it
would definetly leak water real bad if left as is.
I would appreciate any help.
Thanks in advance.
Tony Cascio
TS 27093
58 TR3A
PS: Happy New year to all
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|