Morning all
Yesterday tried and failed to fit a new rigid fuel pipe from tap to
tank. Is there some black art to this job?, because it has to pass
through the chassis, does this require to do all the bending in-situ,
because if you pre shape it then it becomes impossible to pass it
through the two small holes in the chassis leg. Any tips would be
great as I just binned the pipe, which eventually snapped from my
attempt to bend it to shape.
John
--
John Gillis
1954 Triumph TR2
1991 Kawasaki W650
Dublin
IRELAND
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|