triumphs
[Top] [All Lists]

Re: [TR] Heater/Water Valve Sealer

To: Dave1massey@cs.com, triumphs@autox.team.net
Subject: Re: [TR] Heater/Water Valve Sealer
From: Aldwyn <aldwyn@sylvancircle.org>
Date: Fri, 17 Nov 2006 08:17:56 -0500
Yes, or the seal at the bottle itself... 30 year old seal, after all!

BTW.. should I be doing this after refilling the radiator, or before?  I 
assume before, but since I am un-edumacated on these matters, I figured I 
would ask.

Thanks!
          Aldwyn


At 07:55 AM 11/17/2006, Dave1massey@cs.com wrote:
>In a message dated 11/16/2006 6:48:25 PM Central Standard Time, 
>aldwyn@sylvancircle.org writes:
>>I put on a new cap last month....  I'll try burping it, and if that 
>>doesnt do it.. I'll keep looking.  Lots of places to look.  :)
>
>OK.  The next easy thing to check is the tube that runs between the 
>radiator and the bottle.
>
>Dave


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org



<Prev in Thread] Current Thread [Next in Thread>