Hi Paul-
In my case, I called up Apple Hydraulics and they sent me a rebuilt one
for about $100.00 US. I don't know about having yours bored out because you
would have to obtain a new piston and with the labor charge you'd probably
be in a lose situation.
In the case of the old pressure plate, yes you could have it refurbished
and perhaps your mechanic has not thrown yours out yet. I didn't want to go
through the labor of taking the transmission out again and so that is why a
new 0.75 M/C made sense for me.
-Steve
==========================
Just bled I, and it makes no difference. The M/C does say 0.7 on the side,
albeit very indistinctly. Two questions: is it possible to bore out and
re-sleeve a 0.7 M/C to 0.75"? Secondly, could I get hold of the original
Laycock clutch pieces and have them refurbished?
Many thanks
Paul
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|