Okay, While the Gasket Maker Goop is drying on my fixed fuel pump, let me
ask this:
The dome of one of my Su Carbs (H6) does not have correct alignment with
its body, so much so that its piston gets stuck. Either loosening the
three screws at its bottom and/or unscrewing the damper oil gauge stick
allows the piston to go up and down. But, of course, how do I fix it?
Thanks, Paul Dorsey
60 TR3
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.12.4/449 - Release Date: 9/15/2006
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|