> In a message dated 6/10/2006 12:28:28 PM Central Standard Time,
> tr3driver@comcast.net writes:
> > Turns out Frank is doing both types. TRactor motor plates are ready now,
> > TR6
> > plates should be ready shortly. TR7 plates will be a little longer. (Must
> > mean
> > some TR7 had mechanical pumps ... What do the others use for
> blanking plates
> > ?)
Dave Massey replied :
> I made my own. But I had access to a fab shop at the time.
Er, I was talking about the fuel-injected TR7s and what the factory used to
blank the mechanical pump hole that I assume is there.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|