Graham,
The drive shaft guy probably thought he was doing you a favor and to some
extent, he was telling the truth. The reality is that most of the time a CV
type shaft cannot be directly replaced with a regular standard type
u-joint. It could physically be made to fit, and would work per-say but
would vibrate too severely, be WAY overloaded, and fail within a short time
(probably taking a few other things with it) However, the Spitfire
driveshaft isnt really one of those applications where a CV joint is
needed- so not ot worry, older Spitfires live happily with the old standard
joints in them!
*********************************
Original Message:
>Hi Folks
>A friend of mine has a Spitfire with a propshaft problem, the shaft is one
>with a CV joint on, the joint has gone bad and she has been told that you
>cannot fit the sliding spline or strap drive shaft in place of the CV joint
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|