tr3driver@comcast.net wrote:
> ...Slow spinning (it should turn very fast with the plugs out) may
> also explain your rather low oil pressure. And a bad starter brush or
> winding can cause exactly that symptom.
My TR3A had a slow-spin condition when I first put it back together.
Eventually I figured out that the funny-looking piece of bronze tubing I
had found on the garage floor was the bearing from the back end of the
starter.
I too would suspect the starter &/or connections to it.
Geo H
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.2.3/281 - Release Date: 3/14/2006
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|