>My switch, on the other hand, is about 1 3/4" in diameter and about 2-3"
>deep. It has 2 cables hooked on the back (to battery & starter, I guess).
>It also has room for 2-3 other slide on connectors. And I need to ask, what
>besides the dash does it mount to?
This sounds like the underhood switch that completes the
circuit to the starter, not the dash switch. It would have
a rubber button at one end, two heavy duty copper stud
contacts (battery, starter), and a spade connector or
two to connect to the dash switch.
Could that be the source of confusion here?
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|