Re: Powder Coat

[Hoyt <hoyt@cavtel.net>]

On Thursday 01 December 2005 15:46, TRsick@aol.com wrote:
>     Must regular powders cure at roughly 350F - 400F.  So the toaster will
> work to cure powder. It's a little small so you will only be  able to cure
> items that will fit in the oven.

I agree that it would be fine for small parts. You may not get uniform heating 
for larger parts. It's worth a try; let us know.

-- 
Hoyt


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org