Chris and others, When I responded I thought that Steve was referring to the
thicker covers which protect the U-J's and not the rubber convoluted boot
which covers the splines. That boot is very important and should be
immediately repaired if cut. I don't know what I was thinking but I
misspoke.
JVV
----- Original Message -----
From: "Chris Buckley" <chris.buckley@tz.knightfrank.com>
To: "'Gerald M Van Vlack'" <jerryvv@alltel.net>; "'Steve Smith'"
<dogzbody1@yahoo.com>; <triumphs@autox.team.net>
Sent: Tuesday, September 27, 2005 12:10 AM
Subject: RE: TR6 Axle boots - advice needed.
> Gerald, Steve,
> My TR4A definitely has boots and they are also shown in the manual. I
> cannot comment on the usefulness of them.
> Regards
>
> Chris Buckley
> > The boot covering the axle joint on my TR6 is torn.
> > Can these be replaced by just unbolting the axle to differential hub
> > or must the whole axle come out?
> >
> > Thanks for any advice you can provide before I go down
> > the wrong road!
> >
> > Steve
> >
> > '69 TR6
> > CC25805L
|