Chris Buckley wrote:
>I am rebuilding a TR4A and have bought replacement tumblers for all
>locks. Can anyone tell me how to remove the old tumblers from door
>handles and boot handle? Cheers
>
Chris, did you get an answer to this one? I just took apart a spare
handle so I can give you the run-down. Or see this handy photo of my
disassembled door handle:
http://www.newellboys.com/parts/doorlock.jpg
1. Remove the door handles from the door (or remove it from a box of parts)
2. unscrew the back plate and unscrew the skinny bolt on the end
3. remove the door-opening button then take off the washer and spring
from the backend
4. drive the small pin out of the chrome button -- I used a small nail
to drive it out
5. assembly is the reverse more or less
Steven Newell
Littleton, CO USA
'62 TR4 x 2
|
