The are great machines. We'd be bored if it weren't for the challenges.
:o)
-----Original Message-----
From: Pat Fischer [mailto:pfischer@rmi.net]
Sent: Friday, September 02, 2005 11:03 AM
To: Steinman, Bill
Cc: owner-triumphs@autox.team.net; triumph list
Subject: Re: TR250 Questions
I've had it go the other way, too. The hood vibrates the bumper and the
bolt down, so the bolt is touching the wiper motor. The two nuts on that
bolt need to be snugged together well or the chain reaction starts in.
As if that was an electrical connection you NEEDED to work - well you
know THAT story. You just can't help but laugh.
Pat
Steinman, Bill wrote:
>Pat:
>
>Excellent idea! Funny you should mention that. My girlfriend and I
>were driving home from the office later that day, and before setting
>out I checked the oil. I noticed that the driver's site bumper cone
>was stuck in the bonnet. The nut and washer had clearly vibrated loose
>and I could see them nestled in the corner under the wiper motor where
>the footwell meets the cowl. I fished them out, put them in my pocket
>(yes, I set out without tools on the first day -- I should know
>better). When I got home I put everything back where it belonged. I'm
>sure what happened is that as the nut and washer were just about to
>fall off the threaded pin, they were in contact with the wiper motor
housing.
>
>Thanks so much!
>
>
>
NOTICE: This communication may contain privileged or other confidential
information. If you are not the intended recipient, or believe that you have
received this communication in error, please do not print, copy, retransmit,
disseminate, or otherwise use the information. Also, please indicate to the
sender that you have received this communication in error, and delete the copy
you received.
IRS CIRCULAR 230 Disclosure: Under U.S. Treasury regulations, we are required
to inform you that any tax advice contained in this e-mail or any attachment
hereto is not intended to be used, and cannot be used, to avoid penalties
imposed under the Internal Revenue Code.
Thank you.
|