On the 4A there is no vinyl sewn to the carpet for the shifter. There
is for the handbrake. The carpet under the shifter/fascia bracket is
570543/4/5 and for the transmission cover is 570829/30/31
On Tuesday, May 31, 2005, at 10:56 AM, Gerald M Van Vlack wrote:
> I'm just guessing at this point but I think that part reference is to
> the
> vinyl trim that sews to the carpet rather than the rubber seal. It's
> interesting that the rubber seals are not mentioned anywhere. I wonder
> what
> the TR 6 books show?? It's the same stuff but without the leather
> covering
> on the upper boot.
> JVV
> ----- Original Message -----
> From: "Don Spence" <dkspence@telus.net>
> To: <triumphs@autox.team.net>
> Cc: <jeffyporter@hotmail.com>
> Sent: Tuesday, May 31, 2005 12:18 PM
> Subject: TR4A Shift Boot
>
>
>> From the spare parts catalogue: Plate BF, BF15: Grommet assembly,
>> rear,
>> gearbox cover carpet 611883 (red), 611884 ( Midnight Blue)611885
>> (black)
>>
>> This is the grommet though I've never seen a red or blue grommet.
>>
>> There is no gaiter illustrated on any of the Gearbox, Carpet or fascia
>> (bracket) pages. Just the rubber grommet to seal the sfift rod cap to
>> the bracket. Odd.
>>
>> TRF catalogue states: "622381 gearshift Boot upper, sewn vinyl boot
>> with inner rubber boot, stag grain vinyl, TR250, TR6, 1968-72; also
>> fits TR4A to give a more finished appearance than original bare rubber
>> boot."
>>
>> So there you go
>>
>> Don
|