Hi Kurtis,
They just unbolt but there is probably going to be a seam sealer type junk
in between the mating edges of the fenders, the tub, and the trim strips. If
you look up inside the boot at the top edge of the rear fenders, there are
about 5-6 bolt and nut attachments along the top of the fender. You will
need a very short 7/16" wrench to get these loose. I would suggest a box
type wrench if you have one. Those are going to be the toughest to get at.
You might want to have a can of P-B Blaster handy...
Good luck and don't scratch anything!
Dave Connitt
'67 TR4A
http://home.fuse.net/davestr4a
-
|