> When my engine was rebuilt, I started out with 10-30 synthetic, but it
> leaked to much, I then switched to 20-50 synthetic, there is a very slight
> leak, but it is very acceptable.
>
> Al Salvatore
> 76TR6 daily
>
> ----- Original Message -----
> From: "Robert Knapp" <robertgknapp@yahoo.ca>
> To: <triumphs@autox.team.net>
> Sent: Thursday, March 10, 2005 1:10 PM
> Subject: Synthetic Oil
>
>
>>I have done a complete engine rebuild on my TR6 and am wondering if the
>>new seals and the engine overall will function properly on synthetic oil.
>>I have had problems in the past with leaking seals in a 1989 Jeep when I
>>switched to this oil. The engine in this case had close to 200k miles.
>> Thank you in advance Bob Knapp.
|