I think I paid about $10.00 for a 1/2" Allen wrench at Sears. Had to have it
right then and there so
I went out and bought it.
Maybe they just don't want to scare anyone away by mentioning that you need
such a beast. They make
a good conversation piece for your desk.
:-)
Don Malling.
Scott Suhring wrote:
> I am replacing the seals on my brake master cylinder as I had developed a
> lead from the connection point to the servo ('70 TR6). I got everything
> separated fine and drained the fluid. When I went to remove the tipping
> valve, it would not come out after pushing in the plunger to allow the valve
> to right itself, as the Bentley instructs. What I think needs to occur is
> that the tipping valve securing nut must first be removed. Is this just too
> obvious and the Bentley neglected to mention this? It appears to require a
> 1/2 Allen wrench.
>
> TIA
>
> Scott Suhring
> Mechanicsburg, PA
> '70 TR6
> "59 TR3
|