----- Original Message -----
From: <L1J1S@aol.com>
To: <triumphs@Autox.Team.Net>
Sent: Friday, November 26, 2004 4:16 PM
Subject: tr3 breather pipe
> to the lists, i noticed the breather pipe on my tr3 blows out the residual
> from the motor
Larry:
The breather pipe has a 45 degree angle cut to the rear and the air passing
around that draft tube causes a low pressure area at the rear of the tube
pulling the air out of the engine. Running a pipe or tube to the rear would
defeat that design. What you have are worn rings. A dry / wet compression
test will confirm.
Lou Metelko
Auburn, Indiana
|