Guy D. Huggins wrote:
>2. Does anyone know of a supplier of the bolts that join the adapters to
>the couplings?
>
Moss also shows these -- at $2.40 per bolt I suspect they are the
correct 'safety wire' bolt.
>3. One of the steering rack boots is secured with two fasteners. The
>other with one fastener and one wire. I bought the kit from TRF and I
>can't figure out how the wire is "fastened".
>
The boot kit may come with zip-ties but who wants those on a TR? The 3
small fasteners were just wire-style hose clamps. As Randall said, the
big end of one boot uses the wire which is just twisted, though the
original (I think) was done with a little loop into end of the twist so
you don't leave a sharp wire sticking out (to find when you reach in
there). The real fun may come when you stretch the big end of the D/S
boot over the end of the rack... had to think about that one for a bit.
Geo Hahn
59 TR3A
64 TR4
Mt Lemmon, AZ
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|